Fortinet FortiSwitch Operator
Learn FortiSwitchOS fundamentals, investigate outages, and provision managed switching through a FortiLink controller.
Choose your first lab
Meet the CLI · First Contact
- Labs ready
- 82
- In progress
- 0
- Objectives
- 0/344
82 labs ready
Course foundation
FortiSwitch administration and managed onboarding
Build a repeatable switching workflow: inspect the current state, configure a focused change, and verify forwarding. Begin with native CLI navigation and management, then apply the same habits to VLAN membership, tagged links, spanning tree, and link aggregation.
- Software
- FortiSwitchOS 7.6.4
- Deployment
- Standalone + managed VLANs
- CLI preview
- 10 labs
- Switching preview
- 26 fundamentals + 8 operations labs
- Managed preview
- 23 managed activities, including checkpoints; FortiOS 7.6.4
How to study with the official manuals
Use the FortiSwitchOS 7.6.4 standalone administration manual alongside each lab. Read the feature’s purpose, check the native command hierarchy in the CLI reference, and verify both configuration and forwarding after your change. Keep physical-port settings, VLAN membership, and aggregation settings distinct when tracing a fault. Use the standalone documentation for standalone lessons. For Managed Onboarding, use the FortiLink 7.6.4 documentation and make authorization changes on the FortiGate controller.
Curriculum
Open a stage to inspect its lessons and labs.
Stage 1
Meet the CLI
Practice native configuration, interface inspection, and secure management.
Stage 2
Learn Switching
Practice VLANs, packet delivery, trunks, spanning tree, and LACP.
Stage 3
Investigate and Recover
Establish outage evidence, isolate a VLAN fault, and verify repairs without disrupting another department.
Stage 4
Managed Switching
Authorize the expected switch, deliver access VLAN policy, and verify service.
Stage 5
Copper deployment and recovery
FS-124F: declared 1G full-duplex copper, carrier versus VLANs, independent controls and native saved recovery.
Stage 6
Software IPv4 routing and management
FS-124F standalone software IPv4: named VLAN interfaces, static and discard routes, return paths and local management access.
Stage 7
Declared optical service and recovery
FS-124F with explicit SR modules and OM3 fiber; distinguish carrier from VLAN and return-path service.
Stage 8
FortiLink Topologies & Resilience
Extend managed switching into redundant deployment designs.
Coming soon. Extend managed switching into redundant deployment designs.
- Physical ISL diagnosis and recovery
- Supported stack designs, MCLAG, and resilient controller connections
Stage 9
Administration & FortiEdge Cloud
Maintain switches across their management and software lifecycle.
Coming soon. Maintain switches across their management and software lifecycle.
- Management modes, configuration backup, and software maintenance
- Standalone administration and FortiEdge Cloud management
Stage 10
Layer 2 Security & Authentication
Protect access ports and authenticate connected endpoints.
Coming soon. Protect access ports and authenticate connected endpoints.
- Port security, filtering, and antispoofing
- 802.1X authentication and dynamic VLAN assignment
Stage 11
Multicast & Endpoint Services
Support voice and multicast endpoints with deliberate port policy.
Coming soon. Support voice and multicast endpoints with deliberate port policy.
- Multicast forwarding and endpoint access control
- LLDP-MED discovery and endpoint provisioning
Stage 12
QoS & Multi-Tenancy
Prioritize traffic and separate shared switch resources.
Coming soon. Prioritize traffic and separate shared switch resources.
- Traffic classification, queues, and QoS policy
- FortiSwitch port assignment across VDOMs
Stage 13
Standalone Layer 3 Routing
Connect subnets through a standalone FortiSwitch.
Coming soon. Connect subnets through a standalone FortiSwitch.
- Layer 3 interfaces and gateways
- Route selection and end-to-end forwarding verification
Stage 14
Monitoring & Advanced Troubleshooting
Diagnose switching incidents using operational evidence.
Coming soon. Diagnose switching incidents using operational evidence.
- SNMP, sFlow, and packet capture
- FortiLink diagnostics and configuration evidence
Stage 15
Final FortiSwitch Assessment
Demonstrate an integrated deployment and recovery workflow.
Coming soon. Demonstrate an integrated deployment and recovery workflow.
- SwitchLab scenario combining the planned domains
- Configuration, service recovery, and documented handoff
Course details and blueprint
What you will be able to do
- Navigate the CLI and configure secure management access.
- Build VLAN and trunk policies and verify packet delivery.
- Configure spanning tree and LACP, then diagnose and repair failures.
Path notes
- Designed for
- Network learners practicing standalone FortiSwitchOS and bounded FortiLink managed switching.
- Recommended knowledge
- Availability
- Preview: 10 CLI labs, 26 switching fundamentals labs, and 8 investigation and resilience activities plus 23 managed-switching activities are available. Five copper deployment, eight software IPv4 routing and two declared optical recovery activities extend that foundation. Remaining depth across the advanced domains is still unfinished; no complete exam coverage is claimed.